Looking for:
Florida building code- Florida Building Codes for Coastal Performance - Vinyl Siding Institute - VSI
Florida building code
Considerations for High-density Settings When installing polypropylene siding in high-density settings less than 5 feet to property line , the product must have a certified E84 or UL flame spread test report. Florida Building Code Chapter 14 provides general product and installation requirements for cladding. Product Requirements Products must be certified and labeled to show they conform to their established ASTM standard: Building officials may rely on code compliance reports for verification based on the established standard for the product category, ASTM D Installation Requirements The following are prescriptive and performance installation requirements for Florida: In general, vinyl siding and insulated vinyl siding are installed 16" on center using roofing nails, although variations can be done including other approved fasteners like staples and screws.
It must be installed over some type of wood sheathing. In Florida, Florida Energy Codes Insulated vinyl siding with a minimum R-2 can be used for energy code compliance as a form of continuous insulation in Florida. Download Quick Chart. Installation, replacement, removal, or metering of any load management control device is exempt from and shall not be subject to the permit process and fees otherwise required by this section.
Completed applications must be able to be submitted electronically to the appropriate building department. Payments, attachments, or drawings required as part of the permit application may be submitted in person in a nonelectronic format, at the discretion of the building official. The written notice must identify the permit that is set to expire and the date the permit will expire. If the local building code administrator or inspector finds that the plans are not in compliance with the Florida Building Code, the local building code administrator or inspector shall identify the specific plan features that do not comply with the applicable codes, identify the specific code chapters and sections upon which the finding is based, and provide this information to the local enforcing agency.
The local enforcing agency shall provide this information to the permit applicant. In addition, an enforcing agency may not issue any permit for construction, erection, alteration, modification, repair, or demolition of any building until the appropriate firesafety inspector certified pursuant to s.
Any building or structure which is not subject to a firesafety code shall not be required to have its plans reviewed by the firesafety inspector. Any building or structure that is exempt from the local building permit process may not be required to have its plans reviewed by the local building code administrator. Industrial construction on sites where design, construction, and firesafety are supervised by appropriate design and inspection professionals and which contain adequate in-house fire departments and rescue squads is exempt, subject to local government option, from review of plans and inspections, providing owners certify that applicable codes and standards have been met and supply appropriate approved drawings to local building and firesafety inspectors.
The enforcing agency shall issue a permit to construct, erect, alter, modify, repair, or demolish any building or structure when the plans and specifications for such proposal comply with the Florida Building Code and the Florida Fire Prevention Code and the Life Safety Code as determined by the local authority in accordance with this chapter and chapter However, this subsection does not apply to the construction of manufactured homes as defined by federal law.
Nothing contained in this subsection shall be construed as nullifying or divesting appropriate state or local agencies of authority to make inspections or to enforce the codes within their respective areas of jurisdiction.
The structural inspection plan must be submitted to and approved by the enforcing agency before the issuance of a building permit for the construction of a threshold building. The purpose of the structural inspection plan is to provide specific inspection procedures and schedules so that the building can be adequately inspected for compliance with the permitted documents. The special inspector may not serve as a surrogate in carrying out the responsibilities of the building official, the architect, or the engineer of record.
The special inspector shall determine that a professional engineer who specializes in shoring design has inspected the shoring and reshoring for conformance with the shoring and reshoring plans submitted to the enforcing agency.
A fee simple title owner of a building, which does not meet the minimum size, height, occupancy, occupancy classification, or number-of-stories criteria which would result in classification as a threshold building under s.
The inspector shall be a person certified, licensed, or registered under chapter as an engineer or under chapter as an architect. However, the code shall set standards and criteria to authorize preliminary construction before completion of all building plans review, including, but not limited to, special permits for the foundation only, and such standards shall take effect concurrent with the first effective date of the Florida Building Code.
After submittal of the appropriate construction documents, the building official may issue a permit for the construction of foundations or any other part of a building or structure before the construction documents for the entire building or structure have been submitted. Corrections may be required to meet the requirements of the technical codes. Each shoring and reshoring installation shall be supervised, inspected, and certified to be in compliance with the shoring documents by the contractor.
The named contractor to whom the building permit is issued shall have the responsibility for supervision, direction, management, and control of the construction activities on the project for which the building permit was issued. Inspection services that are not required to be performed by a state agency under a federal delegation of responsibility or by a state agency under the Florida Building Code must be performed under the alternative plans review and inspection process created in s.
A certificate of completion or occupancy may not be issued until such operating permit is issued. The local enforcing agency shall conduct its review of the building permit application upon filing and in accordance with this chapter. The local enforcing agency may confer with the Department of Health, if necessary, but may not delay the building permit application review while awaiting comment from the Department of Health.
The property owner may retain the original contractor listed on the permit or hire a different contractor appropriately licensed in this state to perform the work necessary to satisfy the conditions of the permit and to obtain any necessary inspections in order to close the permit. If a contractor other than the original contractor listed on the permit is hired by the property owner to close the permit, such contractor is not liable for any defects in the work performed by the original contractor and is only liable for the work that he or she performs.
Comments
Post a Comment